Gallery G2T Infra Red Heating Design & Installation For the Home & Business.


The Technology

The latest infrared heating solutions are featured in this section. Recent studies have revealed that far infrared rays oscillate at a wavelength of 6 to 14 microns on the light spectrum. This played an important role for the formation and growth of living things. Therefore, this is the reason why far infrared rays are also known as “biogenetic rays”. All living things on Earth are mainly composed of water and proteins. Water molecules are always oscillating and at 8-10 micron wavelength, the “resonance”  occurs. This causes the activation of water into hydrogen ion and hydroxide at high speeds(10-12 seconds). 


Benefits to the Human Body


If this occurs in human cellular tissues, the metabolism of cell and excretion of residues from cells or nutrition are enhanced. This promotes growth in living things. Because infrared rays from the sun emit at 3.5 to 10 microns of wavelength then you will understand why at 6 to 14 microns an infra red heating system will have great benefit to the human body. Humans, animals, flora and nature in general itself has life due to the benefit of safe infrared heating energy from the sun. Human beings emit far infrared rays. Its effect on tissues promotes healthy circulation of blood and body fluids. The effect of this, is to enhance the distribution of oxygen and nutrition to every part of the body. 

Hospitals and the equine industry have used infrared for years and to tremendous Bio genetic effect. The use of bedding made from ‘Bio Ceramics’ technology is also much better for us. This is because it provides you with better and sound sleep, and faster recovery from fatigue. An infrared heating system is perfect when you need some fresh air and open a window, as the energy and heat won’t get lost because it heats you by direct waves not by heating the air.






Facts on Infrared

Far Infrared rays are part of sunlight that we can see in visible rays from the sun. They are also in the form of invisible rays beyond the red in the spectrum ( See Spectrum Image below). Chestnuts in an earthen , stone or unglazed pot will bake softer than when in an iron pot. Therefore, this soft baking is an effect of the far infrared rays produced when ceramics, stone or the like is heated. Ancient Rome new about the benefits of Infrared taking advantage of the suns rays in Bath houses and training halls. Infra red heats does not  heat the air directly. It heats you, the room fabric, and furniture through absorption. Most importantly, the heat is then slowly released  into the room.

Energy Saving Benefits

This means that once the fabric has heated up and begins to release the heat into the room, your heaters can switch off. Their carbon material will continue to emit heat out for some time whilst off. In effect, the room takes much longer to lose heat too. The direct heating nature of infrared means that you can heat for less time per m3 than you do with standard electric and or gas convection heating.

The radiant power of infra red is described by the Stefan Boltzmann law, that it is proportional to the fourth power of the absolute temperature. In contrast, a convection heater needs “over temperature”, thus there is a temperature difference between radiator and air, in order to operate.

Using a control system with your Infrared heating also allows you a zonal heating system. The benefit of that is that you can switch off heaters in other rooms yourself or ideally remotely by thermostatic control, whilst your in another room with the heating on. This again means you that you are also using less heat than gas or electric convection. 

Heating of air by convection leads to air and heat escaping through door gaps, windows & open doors. Convection heat rises quickly in air meaning it can feel cold at the lower part of the room. This also means your convection heating must continually run to heat the room and the air space. The thermal images and comparison images below demonstrate this.

An infrared heating system is perfect as the energy and heat won’t get lost because it simply does not heat the air. Infrared heats the fabrics, objects and people in a room by the direct ray radiant heating process. Infrared heat can switch off when enough heat has been held in the fabrics, wall, floor, ceiling, objects and people and therefore gives savings on running costs.

The safe infrared spectrum diathermic process means that it’s direct heating rays will warm you from all sides equally, even when you are airing the room with a window open. This allows you to feel fresher and makes it easier to breathe. As there is no air movement involved in infrared heat, then it is a great benefit to Asthma sufferers.

UK Government Carbon & Energy Reduction Targets. 

The UK government is pushing for everyone to comply with global carbon reduction agreements, to help save the planet from ever increasing weather and environmental changes. The introduction of carbon credits, carbon taxes and renewable heating and energy incentives is proof of the move to more efficient ways of producing and using energy. The UK government is moving towards fossil fuel heating being replaced with more efficient heating systems. Its own website states that:

“The government is committed to expanding the low carbon economy while hitting our carbon budgets. It is likely that by 2050, we will need to fully decarbonise how we heat and cool our homes and businesses. We are looking at the best ways to cut carbon emissions from heat in the 2020s, thinking in particular about how we can reduce reliance on subsidy. We want to lower the barriers to the take up of low carbon heating and cooling.”      


We need to act now to protect our planet and enhance the future sustainability of nature. Forecasts indicate that within 12 years, standard convection heating could be phased out to more efficient and healthier heating systems. The heating market is developing solutions to comply with those government targets. The Gallery & G2Techk are committed to that revolution. We have been testing, working & installing the latest state of art heating systems for some time.


The House Of The future & Housing Situation Today:

Passive or low energy consumption homes are now required by law. The experience in the past few years has shown that efficient and responsive additional heating is needed. Modernization and refurbishment of buildings and housing stock continues and replacement of night-storage heaters (energy consumption, asbestos, EN/ EV 2014)



Cost Savings

Although your price of gas seems lower than electricity, you are constantly running the boiler to heat the space and the whole house. Therefore in many cases the heating part of your gas bill can be higher than electricity. When you compare infrared hearing with the cost of installation of gas, pipe work, yearly boiler service costs, then gas is no longer attractive.

Breakdown and replacement costs of gas boilers over time, combined with the effects on the environment adds further cost and unreliability. Infrared heaters have no moving parts, there are no servicing costs once you have installed. Therefore it makes sense to make the change to infrared heating. This is the reason why more and more new builds and refits choose infrared heating technologies.


G2T Building Insulation Heating Paint & Storage System. (G2T-BIPS)

The latest infrared carbon technologies hold and conduct heat efficiently and cost effectively. It is the perfect solution for every heating situation, building modernisation, refurbishment and new developments of homes, businesses and buildings. It is also ideal for passive house projects. Earlier in this section we set out the technology and benefits of infrared heating. Those principles apply to this G2T-BIPS infrared heating and carbon paint system.  


‘BIPS’ was also developed because it could be applied to walls, floors & ceilings without the need for space taking radiators or heaters. It is simple to install into a new building development by simply laying out our copper tracks and covering the wall, and or ceiling and floors then covering with our revolutionary heat carbon paint. Finish with plaster & paint- and it’s done. With our knowhow it is as simple as it is genius.


To solve heat conductivity issues, we recommend applying a special insulation plaster on walls and floors before installing ‘BIPS’. This combination has proven especially useful on concrete. The heating paint has nearly unlimited durability, needs no maintenance no service or breakdown costs at all and will save you enormous amounts of energy.

We use transformers to ensure ‘BIPS’ gets all the power it needs. It runs on very low 24-volt voltage, which makes it possible to drill nails through the paint or to put in new sockets without any problems – the heat paint will continue to do its work. ‘BIPS’ uses the same principles of the sun’s rays by heating the human body with natural radiant heating rays. The infrared low 24-volt voltage light rays send heat into a room in a healthy way.

Additional Benefits

Hundreds of happy & satisfied customers have already been installed with this technology. Our engineers, physicists and test consumers got together to create the perfect heating system. It has enabled the development of our carbon technology paint mixtures. This was to find the ideal carbon paint which spreads the heat in a perfect, incredibly efficient and economical way. The Paint combines low consumption, with incredible durability but still is amazingly handy and easy to use. Solar energy power can also be routed to help power the heating system.

It is most efficient to locate the BIPS heat paint in the coldest parts of a room. It should cover an area as big as possible to heat the room but does so very effectively, whilst using very low consumption. Less heat per m3 is needed to heat the room compared to other forms of heating including electric and gas convection systems.

‘BIPS’ is much more efficient than any other heating system. One of the reasons is that differences in temperature between the heating system and the outside walls are very small and therefore nearly no heat at all escapes outside. As the walls start to dry out from the operating heating paint, the walls become more effective insulation & with the heat paint become both a heat storage system whilst radiating enough heat into the room to keep the occupants warm.

Infrared is a perfect weapon against mould and rising humidity. The process of ‘capillary action’ is combatted with our infrared heat paint & BIPS system. The humidity inside the walls will not only evaporate, but also be prevented from creeping in again by counter pressure.


Our heating paint works similar to carbon fiber mat and is in the safe light spectrum of 0.8 to 50 micrometres electromagnetic waves (like radio and microwaves). The resistance depends on the thickness of the material. The current flow depends on the resistance and the voltage. Therefore, the surface temperature depends on the current flow and the warmth in the room depends on the time the heater is used with the current flow.

The efficiency of the heater can be easily calculated by multiplying current flow and voltage. Efficiency multiplied with the activation time equals the energy which is equivalent to the warmth in the same unit.



BIPS is ideal for Church renovation heating projects and solves the problem of keeping congregations warm.

NOW is the time for you to switch!!!                                   Contact us if:

You are interested in us installing our heating system into your home, business or development project.

If you wish to become a partner, receive installation training and supply of our system.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.